3/4" 90deg BULLNOSE MITER MARKING TOOL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This tool is for marking the miter for a 90 deg 3/4" bullnose drywall edge. The tool will mark right hand or left hand…
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 58
- Makes
- 0
- Views
- 334
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This tool is for marking the miter for a 90 deg 3/4" bullnose drywall edge.
The tool will mark right hand or left hand miters as needed.
There are two versions. One with relieved corners and the other without, so you can cut excess corner material as you like it.
I used Prusament PLA 215/60 temp settings, .30 mm layers, set in draft mode for speed.
You may want to add a brim of 3-4 loops, one layer high, zero offset from part to help with adhesion if you are having trouble. I did not it with a Prusa i3 MK3s. Print time about 1hr 20 min.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
50%
Filament: Prusa PLA white
Category: Hand Tools