TriHelical Suite
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There basically are two designs included in this suite. One has separate legs and the other design does not. One is a…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 61
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
There basically are two designs included in this suite. One has separate legs and the other design does not. One is a two wall version not intended to be printed in spiral vase mode.
All the others are intended to be printed as a corkscrew, vase mode, single wall layer print.
With the separate leg version, there is a built in support in the bottom due to the leg separation at 25% of the first layers. I did not use any additional support. Just slowed down some and .2mm layers using PLA.
You can also print the single wall designs with 2 outer layers turning off corkscrew/vase, single wall mode and increasing the wall layers. Leave top layers off (0). This will yield a stronger piece that is more likely to be water tight.
Category: Sculptures