Abdeckung für Parkside Magnetleiste
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.77 – €4.61 net (excluding VAT)
For file: Abdeckung Magnetleiste.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.19 excluding VAT (range midpoint).
- Weight reported by the author
- 54 g
- Print time reported by the author
- 4.11 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Küchenfähige Abdeckung für die Parkside Magnetleiste
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Abdeckung für Parkside Magnetleiste
Eine ansehnliche Abdeckung für die zwar günstige,
aber nicht sehr schöne Magnetleiste von Parkside.
Man schiebt die Leisten einfach von beiden Seiten auf.
dann rastet eine Nase in die Befestigungslöcher ein.
Ich habe die Leiste mit etwas GEKO-Tape an den Fliesen befestigt.
--------------------------------------------------------------------------------
Cover for Parkside Magnetic Strip
A nice cover for the inexpensive, but not very attractive, Parkside magnetic strip.
You simply slide the strips on from both sides.
Then a tab snaps into the mounting holes.
I attached the strip to the tiles with some GEKO tape.