1 / 3
ThermoWorks Pro Series Probe Mount Magnetic
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified probe mount to include two 8X3mm magnets
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Had difficulty getting double sided tape to stick to the textured surface on the interior of my upright freezer so I modified the base to accommodate two 8X3mm magnets.
Very quick print, less than 10 min.
Magnets holes are sized 0.1mm over to allow for shrinkage, but still should fit snug enough to not need glue.
Probe hole is friction fit and should hold at any angle
No supports required