1 / 1
Longboard Bushings Collection
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Almost every shape of skateboard and longboard bushings
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's a variety of different longboard bushings. Cones (4 different heights), barrels (4), chubby's (2) and magnums (2). I also added fat cones. The pressure needed to turn and the angle it becomes harder are dependent these shapes. The cones and barrels fit into standard cup washers. The chubbies, magnum and fat cone fit a flat washer as they are ~5mm larger in diameter.
Warning: 3d printed bushings are not as strong as cast bushings, be careful.
Print in TPU with:
- 103% flow
- dry filament
- use concentric infill at 99 or 100%
- 10-20 degrees hotter than the listed temperature
If having trouble printing, ensure a minimum layer time and proper cooling.