MultiGp Drone hinged drone gates 3/4" pvc pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
designed these so i could quickly setup and take down pool noodle style gates for practice and they work great.for…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
designed these so i could quickly setup and take down pool noodle style gates for practice and they work great.
for stacking gates, they are designed with time, cost and durability in mind i use 2' long 1/2" rebar and in the middle i take regular electrical tape and wrap it around until i get about 3mm thickness this will sit inside the gate hinge and allow you to stack these gates with ease.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20
Notes:
use 6 perimeters (shells) 10-20 % infill and i recommend the gyroid pattern.
if you want to print gates that won't be stacked just print the single gate hinge stl 4 times and assemble. if you want to print gates that will be stacked print the stack gate hinge stl 2 times and the single gate hinge stl 2 times.
the holes are for putting small screws in for a better grip on the pvc. however it is not required.
Category: R/C Vehicles