Printrbot Simple metal feet and lcd mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printrbot Simple Metal stability feet and lcd mountingif you have the x axis upgrade you can print these flat if not…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Printrbot Simple Metal stability feet and lcd mounting
if you have the x axis upgrade you can print these flat if not you will need to turn them at a 45 degree angle on the z axis and they will print with supports. you need supports either way for the legs but not for the lcd if you can lay it flat. for the lcd you will need m3 screws and square nuts. if you print the front legs vertically you may want to cut the top section off in your slicer so you don't print the clips.
the LCD brackets and cover are remixed from Prusa I3 MK3 the feet are my design
Category: 3D Printer Parts