printrbot simple metal accesories
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
these are the accessories i made/downloaded. the ubis® 13s fan mount and blower mount are from the guys at printrbot®.…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
these are the accessories i made/downloaded. the ubis® 13s fan mount and blower mount are from the guys at printrbot®. the light holder and blower shroud i made, i found that the blower shroud from printerbot put too much air on the actual hot end and this one does better at putting that air on the filament and not the nozzle, for the light i used an automotive led replacement for halogen dome light bulb and desolderd the ends, when running wires use the wires to hold the light in place, i don't recommend glue as the light gets warm enough to melt hot glue and the odors from contact cement when heated will make your eyes water for sure, printed with this setup for 100+ hours with no issues.
Category: 3D Printer Accessories