Cymbal 3 wing tee nut for Percubo Drum Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cymbal 3 wing nut
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a practical way to lock the cymbals on my daughter’s custom drum set, so I designed this model.
The manufacturer didn’t include any locking mechanism because the kit is meant to be portable and disassembled after each use. In our case, however, the drums stay assembled. To keep the cymbals secure, I chose to bolt them down using these winged nuts.
Since the drum bolts are 1/4 inch in diameter and I had spare tee nuts, this became my solution. I heated the tee nut and pressed it into the center of the wing, so the model wouldn’t require extra features to retain the nut.
If you want to modify the design or use a different nut, the file can be easily adjusted to fit any bolt or nut type.
Print setting:
Nozzle diameter: 0,6mm
Layer height: 0,3mm
Perimeters: 2
Solid Layers: 4 top and 3 bottom.
No supports needed.