1 / 3
QMC5883L (GY-271 ) Triple Axis Compass Magnetometer Sensor Module Housing — image 1
1 / 3

QMC5883L (GY-271 ) Triple Axis Compass Magnetometer Sensor Module Housing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Housing to protect a QMC5883L (GY-271 ) Triple Axis Compass Magnetometer Sensor Module from the elements.

Rating
5 / 5
Likes
6
Downloads
71
Makes
1
Views
189
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

This design was created by Matthew Byington over in the Home Assistant Community, I am simply sharing it here with Matthew's permission for others to use.

Used as an optional housing for the Gas Meter Remote Reading project found here.

This model is a housing to protect a QMC5883L (GY-271 ) Triple Axis Compass Magnetometer Sensor Module from the elements.

It is water tight on three sides. The bottom is open to insert the sensor and let any water that does get in, get out. You can use hot glue or something if you want to seal the opening.

It’s a tight fit intentionally. I would recommend print settings:

  1. PETG or ABS
  2. 10 wall loops (effectively solid, so infill % doesn’t matter in the slicer settings)
  3. 0.16mm layer height