No Deflection Stop Block With Microadjustment and Hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stop block with no deflection, micro adjustment feature and a hinge mechanism.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 134
- Makes
- 0
- Views
- 508
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This stop block is inspired by the John Katz-Moses Universal No Deflection Stop Block, but I added a hinge mechanism to allow for a quick way to get it out of the way without undoing your length of cut setup. I'm very happy with the result, and after a bit of testing I have found it to be quite sturdy as it has not moved on me during regular use. You can fine-tune your cuts using the micro-adjustment feature, which offers 2 cm of movement.
To assemble it you will need:
- 4 M4 nuts
- 1 M4 50mm screw
- 3 M4 15mm screws
The tolarances were desinged for a press fit with the nuts, but your print may vary.
I have also included a T-track slider compatible with ¾ inch T-track, if you print this, you will need 2 extra M4 nuts.
I also used the following thumbscrews: https://www.printables.com/model/441885-knurled-m3-m8-thumbscrews-no-support