1 / 5
Sony HDR AS20, AS15, etc. No-Gimbal Mount for DJI Phantom 2 — image 1
1 / 5

Sony HDR AS20, AS15, etc. No-Gimbal Mount for DJI Phantom 2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I have progressed beyond this to working on a gimbaled version, but thought someone might want to use these files…

Rating
0 / 5
Likes
3
Downloads
39
Makes
0
Views
427
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I have progressed beyond this to working on a gimbaled version, but thought someone might want to use these files which I used on my testbed Phantom a couple of months ago.

I will post the sequel with a controller when I get it finished.

You will need to use 2 M3 screws and nuts to attach the bracket to the plate and an M5 (or M4 with a sleeve) screw and nut for mounting the camera clamp to the bracket. You will also need 4 anti-jello rubber mounts: 7mm x 21mm. Not the tiny DJI type.

Print 2 plates. These plates have all the holes for this design and will be the same for the controller and gimbal version.

You will also need 4 M3 screws to attach the upper plate to the body of the Phantom.

That white thing is a lens cap available elsewhere here on Thingyverse.

AN ALTERNATE PLATE DESIGN CAN BE FOUND HERE: http://www.thingiverse.com/thing:677486

Category: R/C Vehicles

Tags