ISCG-05 Chainguide without bashguard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had to remodel this, but I remixed it into a chainguide for my kids bikes. They didn't need the bashguard feature.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had to remodel this, but I remixed it into a chainguide for my kids bikes. They didn't need the bashguard feature. Worked great to keep my sons chain on!
Printed in PET-CF. 100% infill, 5 walls. 0.6 nozzle with 0.18-0.3 layer height (not variable, just range of working heights)
Probably will make some design improvements for the future (like scalloping where the bolt head compresses the guide for a little more purchase underneath it).
For hardware I recommend a flush mount M6 like the ones shown here, but I'd recommend longer (maybe 16 or 20mm long):
https://betterbolts.com/products/iscg-flush-mount-titanium-bolt?srsltid=AfmBOoqS9dsRbKMOaaGoedIdq_OPUVpC8EejiIawPLhKcBtv4rp1WwKi
Use an M6 locknut (nylock) on the back of the guide itself, for retention.
Honestly I used whatever I had laying around which was not ideal but worked.
Apologies for the crap pictures. I took them as I was running out the door and late for daycare.
NOTES
Purchasing
If you don't have a 3D printer and would like to purchase this item, I would be happy to print and ship it to you. Send me a message at [email protected]. Located in USA but will ship globally if required. Shipping will vary and affect cost.