Adapters for balancing self-tightening 6mm DJI blades (OBSOLETE).
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
THIS DESIGN HAS BEEN UPDATED. SEE:http://www.thingiverse.com/thing:737600 This file will print end adapters for 3mm…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
THIS DESIGN HAS BEEN UPDATED. SEE: http://www.thingiverse.com/thing:737600
This file will print end adapters for 3mm rod for balancing self tightening 6mm CCW and CW blades as used on a DJI Phantom ande others. I used polished 3mm tool steel rod I bought on Amazon, about 6" each. The .stl file prints two sets CCW and CW. The photo shows two more I also printed from the file "End_cap_adapter_for_Phantom_20_x_8mm.stl", by jjisnow. (DJI Phantom 2 Prop balancing adapter for Dubro). I used ABS and mark the ends of the two CCW pieces with a black Sharpie. My design more closely emulates the actual thread ends on DJI Phantom 2 motors, the relief and thread length. I am a new guy to this and my prints still come out a bit rough and oversized, holes too tight, so I resorted to using dies to clean all the pieces up a bit and reaming our the hole for the 3mm rod. If I figure out how the get it right without finish work, I will update. In order to get the part as accurate as possible, I used .100mm layers and slow printing speeds. I may have calibrating and other issues that I do not understand yet, but my prints come out a bit rough and need cleanup. The brim is not part of the .stl file. I added them when I print to help keep them upright while printing. They come off easily. Instructions ============
In order to get the part as accurate as possible, I used .100mm layers and slow printing speeds. I may have calibrating and other issues that I do not understand yet, but my prints come out a bit rough and need cleanup.
Category: R/C Vehicles