NZXT H9 GPU Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.24 – €1.52 net (excluding VAT)
For file: GPU Stand - Creality K1C PLA.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.38 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.3 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
GPU anti-sag supporting stand for the NZXT H9 Flow case.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
A GPU anti-sag supporting stand for the NZXT H9 Flow case. Designed for the Asus ROG Strix RTX 4080 specifically, bit will probably work for any GPU with height of ~70mm and a width of ~150mm. Dimensions of the drawing are in millimeters.
Printed in PLA on a Creality K1C in the orientation shown with supports on the bottom, layer height of 0.16mm, 30% cross-hatch infill.
The stand can be installed by aligning it with the two slots at the bottom of the case.