T -shirts - I create 3D
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
use the moving advertising space for free - yourself
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Men
- License
- Creative Commons — Attribution — Noncommercial
The printing is mirror on baking paper, because the result serves as a iron -on. It is pushed from TPU in two layers of 0.2mm and the second 0.1mm, I think it has the best result.
I have an iron set on cotton level. Just heat for about 30 seconds so that the paper does not overheat (because it leaves brown burned traces). Then let it cool to lightly peel off the paper. If they remained unpainted parts (for example, even though the shirt was already worn), I used a small solder or wood burner, and again through the baking paper I "pasted" the standing part (the set temperature was around 170 ° C)