1 / 2
XShot Motorized Piston Pump 'Utonagan' handguard - long version (remix)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
just a 4cm longer version of the original barrel shroud. all shoutouts go to @LoneWolf052
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 85
- Makes
- 0
- Views
- 569
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
see @LoneWolf052 ‘s profile, he did all the work on this model. You can still print without support and you’ll need the same hardware to lock the barrel shroud in place.
A (longer) handguard for the Motorized Piston Pump by XShot.
There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom.
Slides over the barrel collet from the front. 2 bolts clamp it down.
Can print without support.
REQUIRED HARDWARE :
- 2x M5x30mm socket head screw
- 2x M5 Hex nuts (Nylon lock nuts recommended)