Multibin Screws and heatset inserts storage drawers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a hardware drawer system by Multiboard for storage of M2 - M5 Bolts and hardware as well as heat inserts.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 121
- Makes
- 0
- Views
- 881
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
My Thanks the the Multiboard Team over at Multiboard.io if you haven't checked them out then you should.
all parts were printed on a Centauri carbon using Elegoo PLA Rapid Plus with standard settings. no supports are required.
I will not be including STL. as all STL's can be found on Multiboard's website. only uploading incase someone else has a use for this premade file!
Everything fits together very nicely. only modification made is the bottom drawer. with the weight on it the corner retention pins would catch the drawer a lot so i trimmed it with a pair on snips
The fold out multi point mounts are used on the bottom as feet with a little bit of hot glue or adhesive backed rubber to give you drawers that don't move when pulled on!
Handles are optional. and make moving the drawers around very easy!