Sunnysky X V3 Spinner Cover (x2212, x2216, x2220)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spinner / cover for Sunnysky motors for aesthetics.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
This is a spinner cover that goes over the metal spinner provided with sunnysky 2212, 2216, and 2220 X v3 motors. The metal cover is tiny compared to the diameter of the motor let alone a typically cowling front. This cover fits over the metal part and covers the locking nut. Its a tight fit, but cant be rotated to align the lateral hole in the metal psinner with the cover. Then you can press the axle into the aligned holes to lock in place. A dab of glue would ensure it doesn't come out, but the interference should be enough.
I used supports only on the lower flat region of the cover (painted supports) as shown in the image.
I included the blender file as well. I modeled the metal spinner to use as a Boolean which may come in handy for other adaptations. My use was for a ~powered glider, but I imagine you could adjust the model to fit around propeller cut-outs like a proper spinner. You would have to take care to get the propeller cutouts and hole for the locking shaft to align when mounting the propeller though.
https://sunnyskyusa.com/collections/x-v3-motors
It might work with some of the other collet based similar looking propeller adapters on amazon etc, but I haven't tested any besides what came with the sunnysky motors.