1 / 4
Tensioner puck for LDO Gates GT2 6mm 16T idlers (or any idler up to 10mm wide) Revised X-axis — image 1
1 / 4

Tensioner puck for LDO Gates GT2 6mm 16T idlers (or any idler up to 10mm wide) Revised X-axis

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of the 16T Tensioner puck for vekoj's Revised X-Axis for Prusa I3. This remix allows the use of the…

Rating
0 / 5
Likes
3
Downloads
14
Makes
0
Views
439
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is a remix of the 16T Tensioner puck for vekoj's Revised X-Axis for Prusa I3.

This remix allows the use of the slightly larger (10x15mm 3mm bore) 6mm Gates belt 16T idlers by LDO. They are more robust than the tiny little idlers the original design uses (see side by side pic).

I sourced the Idler and the dowel pin from Printed Solid: https://www.printedsolid.com/collections/prusa/products/ldo-2gt-16t-idler-with-3mm-bore

https://www.printedsolid.com/products/stainless-steel-2-95mm-x-15-8mm-dowel-pin?pr_prod_strat=copurchase≺_rec_pid=2384494821461≺_ref_pid=2384493969493≺_seq=uniform

Print with at least 3 perimeters since the walls are thinner.

Also, I made the nut traps smaller. I have had several of these strip and become almost impossible to remove. Use a heat gun to heat up the nylock nut and then use pliers to push into place. You'll get a +/- 0.01 tolerance this way.

Category: 3D Printer Parts

Tags