DELL MS3121Wp mouse button plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Created using the Reality Scan Android app and Onshape - it's not perfect but it fits and works essentially as well as the standard part. The mod is fully reversible and requires only a PH1 driver to move the existing screws over to the print (these screws are attracted by the magnets in the mouse to hold the plate in place).
It gives 200g actuation force, was ±80g.
I recommend slicing using the STEP file, 3mf geometry provided for reference only.
See included screenshots for recommended print orientation.
- 0.4mm nozzle
- 0.2mm layer height
- organic supports
- 35 degrees overhang threshold
If you want to fine tune or otherwise modify the design, the design is open source:
https://cad.onshape.com/documents/c70aad1b72feaac21975a4a5/w/5eff514a2fce2a2d8fa845da/e/c489f9d23f4e76ae959c8d35?renderMode=0&uiState=689b21a8856c782888151d08