1 / 1
10 Inch Rack Mount for Reolink PoE Switch (RLA-PS1) — image 1

10 Inch Rack Mount for Reolink PoE Switch (RLA-PS1)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

10" rack mount for a Reolink PoE switch (RLA-PS1)

Rating
0 / 5
Likes
4
Downloads
62
Makes
0
Views
293
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a 10" rack mount for Reolink's 8-port PoE switch (RLA-PS1). 

I couldn't find one at the time, so with inspiration from some rack mounts for TP-Link switches I've used in the past, I reworked an existing model to fit this switch.

Be aware it is a pretty tight fit. There is a test print file I would recommend using to make sure your printer tolerances will work out on the full print. It may need to flex slightly to fit in the tester, and it should be pretty snug. The full print took some effort to slot the switch in, but it's a tight enough fit that it's unlikely to require use of the screw mounting slots on the underside.

I would recommend printing with 3 wall loops and 20% infill. I used cubic infill, but it would likely be fine with other infill patterns.

Tags