1 / 4
MDT Presence Detector MR16 Housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for MDT presence detector to mount to a ceiling.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this case to mount a presence detector to the ceiling of my workshop. I made the case a bit higher so the sensor can “see” below the other things hanging from the ceiling.
Printing
Print the case and three of the clips, with the following settings.
- 0.25mm layer height
- concentric top/bottom surface
- 15% cubic infill
- no supports
Assembly
Attach the three clips to the knobs at the bottom of the case (you might need to add some glue). Then push the detector from the bottom in the case, attach the KNX cables and mount it to the ceiling.
CAD
You can access the model files at onshape.com.