Monoprice Mini Bed Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These parts make up a total bed exchange for a Monoprice Mini. This add manual leveling to mine, which did not have…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 22
- Makes
- 0
- Views
- 653
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
These parts make up a total bed exchange for a Monoprice Mini. This add manual leveling to mine, which did not have it.
Check out the assembly video: https://youtu.be/7QtzCL9a45Q
If you would like to support me: https://ko-fi.com/tinyboatproductions
UPDATED 1/3/2021
Heated Bed Upgrade: Here
All parts fit on the printer. I printed them using PLA. Used a 15% cubic infill for all parts.
The rod clamps and bed trays need a brim.
Bed ends should be printed on their back, with supports.
This can also be used to extend the bed in the y-direction by replacing the linear rods and increasing the length of the tray spacers.
Relationships for increasing the bed length:
Bed = Rod - 30
Spacer = Rod - 62
Spacer = Bed - 98
Rod = Bed + 30
Parts:
(2) Bed Ends
(4) Rod Clamps
(2) Belt Clamps
(2) Bed Trays
(2) Tray Spacers
Hardware:
(20) 20mm M3 screws
(20) M3 nuts
(8) M3 washers
(2) Pens springs, cut in half
Belt (about 30cm)
Tensinoer (reuse from printer)
Linear Rods (reuse from printer)
Glass bed
Z-Axis spacer
Bellow are the purchased parts that I used for this, as well as the Z-Spacer I used.
Hardware Kit: https://www.amazon.com/gp/product/B07FCN64HV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Glass Bed: https://www.amazon.com/gp/product/B071RS7DB2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Z-Spacer (really any will work, this is just the one I use): https://www.printables.com/model/138292-yet-another-monoprice-mini-z-spacer-5mm