1 / 1
AWB OneSky Telescope Solar Shroud
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A shroud + filter mount for solar viewing
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
The AWB OneSky telescope was not designed for solar viewing - make sure you know what you are doing if you attempt this!
Instructions: Print 1 of each part and assemble as shown in the video.
- All the .3mf files are already oriented properly for best 3d printing results with no supports. The only part that requires any support at all is “Slot Insert.3mf”. You'll probably want a large brim on “Shroud Base.3mf” though.
Hardware:
- Solar Filter - this is the one I used: https://thousandoaksoptical.com/shop/solar-filters/solarlite-filter-sheets/ - only 160mm circle is needed.
- Screws - you probably won't be able to find the exact ones I used to mount the solar filter in place - so I included the STEP files in case you need to modify the design.
- Magnets (10x3mm) - they aren't totally necessary as the lid itself isn't completely necessary.
Here is a video with assembly instructions and other info: