Kumiko Benchtop Sponge and Brush Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A self-draining holder for sponges (including Scrub Daddy), brushes, and dish cloths.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Designed to sit on your bench and allow brushes, sponges, and dish cloths to drain and dry without cluttering up the work surface. Has a kumiko front to look less utilitarian.
There are two versions of the body of the device;
- The one with the cut out is to suit my bench style (see photo), but needs supports when printing as oriented (which is how I printed it)
- The other version (red in the photos) doesn't have the cutout and therefore doesn't need supports while printing
The Kumiko panel should be glued in place (on all vertical supports); line up with the top (when oriented vertically) and sides manually (there are no location aids, I just eyeballed it). I used cyanoacrylate superglue with a PLA print and it is holding up fine so far.
Please let me know if you'd like a different version of it (with different base cutout, different dimensions, or some sort of glueless mount, etc) or have any feedback I could use to improve it for a future revision.