1 / 5
LaptopStand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This was initially made to be just the orange but after I got to thinking about it i wondered if plywood could be glued to it and finished. After some experimenting here it is. PETG glued to ¼ " birch stained blue. The birch was laser cut and sanded after glueing it to the PETG. The stand is 100 mm at its highest point. Approx. 4 inches. Both sides take around 6.5 hours to print together.