Mount for LocaTag trackers for Selle Royal saddle clip system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for "LocaTag" 36 mm circular tracking devices, for Selle Royal bicycle saddles with clip system.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 20
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About
This is an enclosure for cheap tracking devices commonly sold as "LocaTag" with a 36 mm circular design. The enclosure mounts to the clip system on Selle Royal saddles.
Assembly
The mount consists of three parts - the clip that fits into the saddle, a center piece, and a lid. It requires two M3x10 and one M3x8 nuts and bolts for assembly. Fitment of the nuts and bolts is tight, I'd recommend to test-assemble it first to get the nuts pressed into the plastic.
On some saddles, like the Selle Royal Essenza pictured, the clip system is attached close to the underside of the seating surface, and requires the use of the angled clip (see the files provided).
To mount it onto a bike, first put your tag into the center piece and lid, and close it with the M3x8 bolt. Then slide the clip into the saddle, and finally screw the center + lid assembly to the clip with the two M3x10 bolts.
Printing
The parts in the picture were printed flat-side down with Sunlu PETG on an A1 Mini. There will probably be some ugly stringing in the nut and bolt holes that you may have to remove, or just smush down in a test assembly.