1/4x20 Adapter for Harbor Freight Vise
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to allow for 1/4x20 threaded stands/tripods to be used in place of the default vise.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 15
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
I was using a Harbor Freight vise as a cheap locksport stand, but it felt bulky and didn't fit some locks as well as I would have liked. Saw people online recommend the SmallRig Crab clamp, but wanted to save a few dollars by using my existing vise as a donor if possible. This replaced the metal hex piece inside the lower ball mount. I used the existing set screw to secure the new piece. The new piece is also shorter than the original one on the Harbor Freight vise. I felt it looked cleaner and allows for more of the adjustment to come from the SmallRig arm instead.
Printed in PLA with 100% infill, brim enabled, and 4 walls to make it solid.
You could probably get away with anything greater than 50%, but I like to go heavy on plastic threaded pieces.
There are two STLs in case anyone wants to add a different thread pitch. I'd like to eventually redo it with heat set inserts so I may update this in the future to support those options.