1 / 4
Playstation VR 2 PSVR2 Deluxe Audio Strap DAS Adapter "Bunny Ears" — image 1
1 / 4

Playstation VR 2 PSVR2 Deluxe Audio Strap DAS Adapter "Bunny Ears"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Not my finest work - Use VHB tape or similar double-sided adhesive (hot glue probably work fine) to bind to the halo

Rating
0 / 5
Likes
2
Downloads
13
Makes
0
Views
452
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Use VHB tape or similar double-sided adhesive (hi-temp hot glue probably work fine) to bind to the halo. 

3M VHB tape is a pressure-activated glue/tape hybrid that can still be removed if needed. Superglue fails to adhere to the polypropylene outside.

https://www.amazon.com/Double-Mounting-Waterproof-Strong-Adhesive/dp/B0CQ1XKW3N

The back end of the halo will need to be cut off, permanently damaging your stock strap. Take the back side apart first to pull the headphone port out of it before you cut. The front side doesn't need to be taken apart unless you want to remove the vibration motor (I did!) or relocate the headphone jack to the other side.

Seems to be pretty comfy on my head :)

Weighs ~45g in ABS on my machine, I have one perimeter at 0.55mm thickness and 5% gyroid infill. The part was intentionally designed to enable low infill + low perimeter printing.

I also included the photo scan of the headset and DAS, maybe you can improve it :)

Tags