Microgreens Planter / Cress Sprouter - Growing Kit with Seed Mesh, Stackable Holder, Lid + Instructions
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.25 – €5.19 net (excluding VAT)
For file: tray mesh.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.72 excluding VAT (range midpoint).
- Weight reported by the author
- 95 g
- Print time reported by the author
- 3 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easy to print planter for cress or other microgreens. Includes anything you need
- Rating
- 5 / 5
- Likes
- 453
- Downloads
- 871
- Makes
- 6
- Views
- 6,790
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray.
Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the solar light from SONNENGLAS (SOMO Gen6) with USB-C option.
There ist a lot of information on microgreens planting in the internet, short Info:
- Prepare seeds and put them on the mesh - use about 50% of the area
- Set up and place mesh in tray; add water but do not submerge seeds
- Cover for dark phase for about 2 days. This may help the germination
- Water daily or twice a day from above - eg. with a water spray
- Provide light after dark phase, but direct/long sunlight may burn seeds!
- Harvest begins after about 1-2 weeks, when leaves appear
Print Settings
· model in photos printed with MK4 | Extrudr PLA NX2 | 0.4 mm nozzle.
· use special settings to make the mesh in slicer (must be a slicer setting, no model, to print well)
· print the tray with 3-4 perimeters and low height (eg 0.10 mm) to achieve water tightness