WinWing MCDU Tilting Table Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to let you screw the MCDU to a board/desk to tilt
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Want your WinWing MCDU to sit on a desk at an angle different than the built in stand? Want to be able to tilt it? Yep, I did, sure it's not true to life like in the cockpit, but my desk is not the same as an Airbus cockpit either… Anyway, hardly curing cancer here, but it's two flanges that let you put a captive M6/1/4" hex nut and then a M6/1/4" bolt through the holes in the built in stand and then using wood screws attach the flanges down to the board/desk below. Note: You need to screw in the flanges to the board first unless your right-angle screwdriver is awesome. You can adjust the tilt friction by tightening/loosening the bolts.
As always I have the STEP files in here to let you modify as you need for your sim setup. I'd suggest a washer between the bolt and the built in stand.