1 / 2
Sovol Zero LED mounts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts for self sticking stripes
- Rating
- 4 / 5
- Likes
- 9
- Downloads
- 42
- Makes
- 1
- Views
- 352
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Requires at least 4x M3x10 SHCS and 50cm of LED strip (25 for each side). I connected mine to the always-on 24V on the motherboard, as the standard LED strip MOSFET can’t supply enough power for COB LEDs, making them too dim.
.STEP made by @DevMiner_3577689 its nicer than the .stl, I recommend printing it instead
Recommended print settings:
2 perimeters
10% infill
At least PETG (i used one from PETG for ~200 hours of ASA print time without issues)