1 / 2
Filament / spool roller freestanding
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
You need 2 608 bearings (8x22x7)
I used a 10mm rod, grinded the ends down to 8mm.
Be a lot easier to quickly design a plastic insert and glue it in on both sides of the roller but that aint my job anymore lmao.
You dont need any supports for this.
You will need double sided tape or grippy pads as the extruder will pull the roller.