1 / 5
Hero Me Gen7 cable tower with integrated probe mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Combined "HMG7 Cable Tower Tall Left 5mm" and 12mm inductive probe mount.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Standard Hero Me Gen7 probe mount was too far from extruder body and collided with printer frame. So I made a combined part in FreeCAD.
The FreeCAD project file (.FCStd) is included. There is still place to mount probe even closer to extruder by 4mm or so. Don't judge the model, its a second time I opened FreeCAD.
Printed in PETG
Layer height: 0.2mm
Top layers: 4
Bottom layers: 3
Perimeters: 3
Infill: support cubic 30% at least.