KTM 1290 Super Adventure R - side stand extender
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side stand extender for KTM Super Adventure R
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Side stand extender for the KTM Super Adventure R 2021+ (other models not tested)
Several model files are available for single and multi material printing, depending on the type of fasteners and if they are printed with or without any text on both top/bottom parts. For this print i used a lot of layers to have as much plastic as possible underneath to support this heavy adventure bike, this may be overkill but with a quick print like this i decided not to save on filament and play it safe. I printed these in ABS for a good heat resistance.
Types of fasteners:
- 3x heatset M5x9.5mm
or
- 3x hex nut M5 (please note: i have added these files since M5 heatset inserts are less common, files have not been tested yet!)
- Both use 3x M5x12mm BHCS screws