1 / 3
Cateye computer bike handle bar mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cateye computer bike mount using m3 screws and m3 nuts
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 64
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I just didn't wanna buy this one, which is oem
CATEYE OF-100 Out Front Bike Computer Bracket
so I made this!
REQUIRED HARDWARE:
- 2x m3 nut
- 2x m3x8mm, or really, anything longer than 7mm
- ….thats it
PRINTING RECOMMENDATIONS:
- Filament: PETG, ASA, ABS recommened, asa is better for weather resistance than abs, petg is easier to print than both of them and should be okay. Do not use PLA, it will creep. Using CF/GF filled filament will result in a stiffer mount.
- Walls: 3 minimum, 4 recommended.
- Infill: whatever you want, at 15-20%.
- Supports: optional
I will leave the rest to you.
included is the fusion file, in the parameter table you can change the handle bar diameter to fit your bike, I am still trying to learn fusion so you will see some questionable designs, remix as you wish.