1 / 2
Canadian Freedom with Maple Leaf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print Settings: .20mm Quality General PLA Printer: Any Printer Supports: None Infill 30%, Iron top layer
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
Instructions: Originally printed on a Prusa Mini+, but you can scale the files up or down for your application. NOTE: make sure bed is clean and flat, and you have good adhesion on the 1st layer, there is a lot of fine detail on the 1st layer.