Corrugated Drain Pipe Wye (Y) - 3" pipe into 4" pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Y fitting that allows joining 3" corrugated drain pipe into a 4" pipe. You'll have to excuse the main photo…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
This is a Y fitting that allows joining 3" corrugated drain pipe into a 4" pipe. You'll have to excuse the main photo - I had a design problem when printing (2 components of the design were not fully connected to each other). The attached design was fixed and you should not have the same problem, but I forgot to take a photo of the fixed model after reprinting it.
It's designed with female couplings on the input sides (2), and a male coupling on the output side, so that water doesn't flow around the fitting.
This prints on a machine with 250mm Z height - if your machine won't print that tall, you might have a problem with this design. When I printed, I painted a support on the inside where the Y connects - not sure if that is necessary, but I didn't want to make a big part like this and then regret not supporting it.
I printed with PTEG, since that is more durable (especially underground) than PLA.
Category: Outdoor & Garden