MP5 Empty Chamber Indicator with Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MP5 Empty Chamber Indicator with Magnets
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
“Empty Chamber Indicator / Safety Flag for MP5 platform. Designed so you can close the bolt on the flag and the receiver will not cut the flag's arm off. Hole included for attaching a lanyard, elastic, or keychain. REMOVE BEFORE PEW PEW!” From remixed Design. https://www.printables.com/model/850151-mp5-empty-chamber-indicator
Added a pocket for two 10mm x 3mm magnets. Also added some Mp3 text and shortened it for my preferences.
When printing, I inserted a pause at layer 33 to allow for placing the magnet.
I printed with 75% gyroid infil, 3 walls, and tree supports (build plate only).
If not using magnets allow supports everywhere, it will fill the cavity.