1 / 11
PaK 40 75mm anti tank gun — image 1
1 / 11

PaK 40 75mm anti tank gun

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

PaK 40 towed 75mm anti tank gun. Gun elevates + rotates with the armor. Wheels turn and tow bars move. About 1/40 scale.

Rating
5 / 5
Likes
58
Downloads
290
Makes
2
Views
1,094
Reviews
2

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial — Share Alike

The gun elevates and rotates within the approximate range of the actual gun. I don't recommend any raft or brim. All the holes and edges will require some trimming. See photos for assembly. The assembly begins with the base 1. Attach the tow bars 2 and 3 using the pins 4 and 5. Mount the carriage 6 onto assembly A. My print was tight, but with a little insistence it went on. I worked it a little to loosen it up. The lower armor 7 attaches to the front of the base on assembly A. Next attach the wheels 8 and 9 to assembly A using the axle pins 10 and 11. You may need a little glue, but make sure it is only on the axle pins and the base, none on the wheels. The gun breach 12 fits down into the carriage on assembly A. The gun is very front-heavy and the rotation points need some friction to hold the gun secure, so don't file it. I had to shim mine with a bit of plastic to get the friction needed. Insert the gun 13 into the breach, it may need a little filing. Install the handle 14 into the center of the breach pivot point. Lastly the top armor 15 fits onto the gun carriage. A touch of glue is necessary if it is intended to move the gun around much. The gun barrel is difficult to print, I experimented with several methods and found the best result with a horizontal print using a brim and supports. I also got a good print of the gun standing vertical, muzzle down, with supports, brim and a wall. It took some filing and cleaning to get the tip to the proper shape and clear it of the supports. I drilled the bore with a drill bit. Added a tow bar hook up, nothing that looks like the real gun, but the real components would be too small.