Window Frame Corners & Latches for Insect Net
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To complete this project, you will need: Wood strips (5 mm depth × 20 mm width) Slim hinges (60 × 35 × 1 mm)
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 19
- Makes
- 0
- Views
- 281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Required materials:
Wood strips (5 mm depth × 20 mm width, available at OBI)
Slim hinges (60 × 35 × 1 mm)
ABS filament for 3D printing
BISON EPOXY 5 MIN glue
Wood clamps (for holding parts together)
Stapler (for attaching the insect net)
Assembly instructions:
Measure your window opening. For the longer side, add 4 cm to the measurement. The longer strips will be fully inserted into the printed corners, and the shorter strips rest against the longer strips – no additional length calculation is needed.
Glue the 3D printed corners to the wood strips using BISON EPOXY 5 MIN. Use clamps to hold the parts together and let the glue cure for about 1 hour.
Attach the Slim hinges with the same glue.
Stretch the insect net over the frame and secure it with a stapler. The net can be pulled taut and clipped into the printed corners before stapling to ensure proper tension.
Attach the latches. (They are designed for a 1.5 cm frame.)