1 / 3
Waste Bin for ONETOUCH glucose test lancets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A easy-to-use container for safe disposal of ONETOUCH Delica Plus glucose test lancets
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 1
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
a small waste bin for used glucose test lancets.
usage:
1) remove the cap of the lancet holder
2) insert the lancet head into the hole
3) push the slider of the lancet holder forward
4) let the lancet fall into the bin
my print settings:
- filament = grey PLA, unbranded
- 0,1 mm & 0,2 mm layer height @ 0,4 nozzle
- 3 perimeters
- 10% gyroid infill
- solid layer: 3 top & bot
- supports: no
Notes:
- The cap should be printed with a layer height of 0.1 mm. At 0.2 mm, I experienced loose filament in the threading. The container prints fine at 0.2 mm.
- The slot in the cap is no longer necessary — I added it before realizing the slider can push the lancet out effectively. Learned that from a helpful comment here.
Update 28.11.2025 - V1.1
- A small chamfer was added at the beginning of the case thread to facilitate smoother engagement on the first turn
Happy Printing!