Daring Dragon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dragon waiting to swoop down when its enemy is weak.It takes it's food in it's beak and flys high into the sky
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Standard Digital File License
This is my daring dragon I made with AI. The settings I recommend make the model take a long time. I suggest are 100% infill,0.2 mm nozzle, tree support and the slowest speed your printer can go. I did the default settings for PLA and I got a bit of stringing with my model and the infill was way too little so it snapped (you might have seen I hot glued it back).I also did a support that was easy to print and take off but it wasn't enough for the complexity of the model. Or you can do 50% infill and a 0.4 mm nozzle, tree support and the medium speed your printer and go. If you are ok with how I did it, you and do the default, PLA ones. You also need to scale it down to 150 mm on the X axis and the Y and Z are the same ones you get.