Axagon ALINEbox 3.5 inch HDD caddy replacement body with 120mm fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds a space large fan to cool down the hdd and vent holes on both sides. Uses stock HDD rails, front and back piece
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed in Siemens SolidEdge.
Replacement body for Axagon 3.5 inch hdd caddy inspired by Playstation 2. The stock body has no ventilation and has resulted in my HDD overheating and dying.
The fan can be connected to 7V (between 5V and 12V points on the converter board for quiet operation.
Even with those low fan speeds and there not being much space for the air to blow through, the ancient WD Black HDD i experimented with does not exceed 38 degrees Celsius under load.
Modern HDDs should produce less heat so it should be even better.
Example printed from Spectrum Smart ABS (Warps like hell even with 40 degrees in the enclosure, do not recommend) using 2 perimeters and 10% cubic infill.