Levelor Blinds Wand Connector
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.70 – €0.86 net (excluding VAT)
For file: v4-levolor-blinds-wand-connector_PLA_1h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.78 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 1.15 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Levelor brand blinds use a connector piece for the wand which can break easily. Replace it easily with this print.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Standard Digital File License
Levelor brand blinds use a fragile connector piece for the wand which the tiny tab ends can break easily. This piece is rarely sold separately. Replace it easily with this print.
Original work designed in OpenSCAD. This is the fourth version, and it looks like all the kinks have been worked out.
Recommend printing in highest detail, 50% or higher infill, and with minimal supports for the arch and torus. Ensure the details on the tab ends are clean and trimmed flush on the outer edge. PLA works great, but the tabs are the weakest point, if you have tabs delaminate, use an alternative with better layer adhesion.
Print pictured was one of the last ones I made but the tab fingers tore off with the supports, so watch for that. There is not room in the blind tilt mechanism for a more robust design.