Drilling template for hole 145mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A drilling template for drilling a hole of 145mm in a stone wall. Hole in the middle is 12 mm. Outer holes are 8 mm. I…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A drilling template for drilling a hole of 145mm in a stone wall.
Hole in the middle is 12 mm. Outer holes are 8 mm. I used first drill 8 mm, then 10 mm, 12mm and 14mm (skipping a hole).
The template is already used so photo has already some damage on it.
First I drilled a hole of 12 through the wall. Then I used a long threaded rod through the wall with on both side a bolt to keep the template at its place. Put an extra bolt in a drilled 8 mm hole to avoid moving of the template.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Steel
Rafts:
No
Supports:
No
Infill:
20%
Filament:
123d PLA
Category: DIY