side pannier rack for BTM Wildfire, SLC-compatible
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
side pannier rack for the Black Tea Motorbikes Wildfire which is compatible with the SW-Motech SLC system
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 183
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
i wanted to use existing SW-Motech Legend Gear side-panniers but there are no fitting racks for the BTM Wildfire on the market yet. So i made my own.
Disclaimer: these need to be strong! Really, really strong! Using PC-CF wasn't enough on it's own, i also printed 4 perimeters(0,6mm nozzle!) and 40% gyroid infill. I tested them offroad with a 10kg weight, which they held up to but flexed considerably. Since the panniers are only rated up to 5kg i'm okay with that. In the future i might order them as a metal part, to soothe my anxiety once and for all.
Print:
mirror the rack to get the one for the other side, the ridge needs to be on the inside under the original bracket.
you need 4 of the normal mounting things and 2 of the locking sort.
Hardware:
-2x countersunk screws M6x25mm
-4x countersunk screws M6x20mm
-6x Drive-in nuts M6
-4x flange head screw M6x40mm, TX30 to match the original ones
prefferably all hardware in stainless
v3 has a slightly different shape to better accompany the original bracket. Also i made a .dxf of that one, to maybe order this as a lasered out metal part (the holes with a thread are 5mm diameter for M6 thread cutting)
SLC-Traeger-Wildfire-batteryslots_PartDXFv2_2 picks up on the design of the battery box and is the final version I decided on and ordered in stainless steel. It is not designed to be 3D printed as i settled on using stainless steel, so there is no space for the M6 nuts or even threads in the model. To be used in conjunction with the _v2 pin heads, screws remain the same.