XL Plant Pot With Saucer | Scalable | Big Flower Pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A big scalable plantpot with saucer!
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 165
- Makes
- 0
- Views
- 643
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had to repot a large plant and designed this pretty big plant pot for that purpose. Since not everyone needs such a large pot, I also uploaded a smaller version that is 70% of the size. You can easily scale this to your desired size.
The full-size version is 360 mm long and wide and 325 mm high with the coaster.
Accordingly, the 70% size version is only 252 mm long/wide and 228 mm high.
I recommend using the 70% version for scaling. The coaster has small raised elements to ensure that it remains perfectly aligned with the pot. If the 100% version is scaled down too much, the raised elements will no longer have enough play because the tolerances become too small.
To make the coaster waterproof, you can save some filament by applying a sealant to the coaster.
The pot has a structure in the lower part of the interior, which I filled with gravel and which corresponds to the height that the water can reach in the saucer. This allows the soil to dry out while the roots grow into the gravel after a while and can absorb the remaining water there. In principle, this is similar to a self-watering system in which the roots adapt to direct contact with water.
To prevent water from collecting in the 3D-printed structure, you should use Gyroid Infill for the lower section and drill holes into the chambers from below after printing.
I also created a sleeve that fits inside the pot to prevent the soil from sticking to the sides. This should make it much easier to remove the plant from the pot. The file is simply printed in vase mode without bottom layers. A brim is recommended here.
By the way, the pot was part of a video in which everything is explained in more detail. Feel free to check it out on my YouTube channel! :-)
| Please leave a like if you enjoy my design. Also feel free to check out my other uploads. :) |