1 / 2
Enclosure for D1 mini / 4xDHT22 Controller
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for D1 mini / 4xDHT22 Controller. Additionally: Analog input.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The electronic parts were mounted on an eplzon prototype board.
Besides the electronic parts, only 4 self tapping screws M3x14 are required.
Labeling was done in Prusa slicer (exported as top_font.stl). top.stl has a blank surface.
The base was printed with Prusament PETG (Urban Grey). Since the font on the PETG top was not sufficient, I printed the top with Prusament PLA (Galaxy Silver, 0.25mm nozzle) again.